stetson90.jpg (49552 bytes)

HESCO
                           ·SHOP SERVICE·

We are the Authorized Service Center for most Jacks and Porto-Powers.  Blackhawk, Norco, Lincoln, SPX, Power Team Hein Werner, BVA, Omega, Zinko. 

We have a 100 Ton Press for testing repaired Jacks.

Hydraulic cylinders are repaired, tested, painted & stamped with 90 day warranty.

.


We Troubleshoot & Service problems with this equipment:
Business Hours
Monday thru Friday
8:00am to 4:30pm
 
 

Pumps

Cylinders

Pumps
Motors
Cylinders
Valves
 
Vickers - Double A
Commercial - Permco
Char-lynn - Eaton
Cessna - Webster
Sundstrand - Staffa
Tyrone - Chelsea
HPI  Nichols
Hydura Oilgear
Dyna - Power
Parker - Hydreco
Whites Roller Stator
Denison - Racine
Rexroth
Borg Warner
 
Vickers / TJ / Aeroquip
Miller & Milwaukee
Parker & Hydro-line
Commercial & Hyco
Peabody / Galion
Heil & Dempster
Perfection & Cobey
Caterpiller & Kawasaki
Clark & Hyster
Custom Hoist
Ford & John Deere
Hiab, Prentice & IMTCO
Pak-mor & E-Z Pak
We are a full service repair shop able to work on your equipment.  Our short list of equipment:
A Standard Modern Lathe for fabricating CPO Chromed cylinder shafts, Pistons, glands and rethreading bad component parts. We can do your Basic Machine Work.
A Baker 3000 lb. Forklift for lifting heavy components out of the delivery
vehicle and moving them around the shop.
(6) six Two Ton Chain Falls for lifting heavy or long items.
(3) three Hydraulic Test Benches for testing our finished products.
We have Acetylene Torches for cutting and braising and Lincoln Welder.
We have a Safety Kleen Parts Cleaning Vat and Steam Jenny depending on how dirty or large the unit is.
If you should have to leave your equipment and we can't get it in our shop we have a fenced in yard, 2,871 sq. ft with 8' razor wire that is lit at night.
 
Our regular business hours are Monday - Friday from 8:00 to 4:30.  After hours and weekend jobs can be arranged.  After hours and Saturdays are at Overtime rate; time and a half.  Sundays and Holidays are Double -time.

24/7 Service by calling one of the On Call Phone Numbers listed on our Answering Machine.

 

Hydraulic Equipment Service Company, Inc (HESCO) has a full service hydraulic repair shop and parts department located at 3014 W. Marshall Street in Richmond's Scott's Addition near Boulevard & Broad Street.  We've been in business since 1967 specializing in Industrial, Construction, Utility and Refuse equipment repair.  We have (2) fully equipped service trucks to send to the job-site, a 6732 sq. ft. shop for in house repairs and a 4,260 sq. ft. yard with 3,000 of it fenced in with an 8' razor wire fence.

We feel we have a quality service to offer your company and we're looking forward to doing business with you in the near future.  We work on most major brand units.  We service these units but are not the distributors.  If it's hydraulic we'll work on it or steer you in the right direction.
 

arnoldhm.jpg (141734 bytes)

In no time we have your hydraulic motor back together and working properly. We can surface hone cylinders up to 9 inches in diameter
HESCO
3014 WEST MARSHALL STREET

RICHMOND, VIRGINIA 23230

TELEPHONE (804) 353-0944

·SHOP SERVICE·

·PARTS·

·ROAD SERVICE·

 

·HOME·

·FRONT OFFICE·